Browse all practice questions for the 92F Military Occupational Specialty (MOS) Training Test 1 Practice. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

92F Military Occupational Specialty (MOS) Training Test 1 Practice course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • RRT stands for which term?
  • Which class of fire occurs in flammable liquids?
  • What is the recommended sequence for transferring fuel to a vehicle?
  • What is the single most common cause of fires?
  • Which NO GO fuse type is the least acceptable in the three-stage filter process?
  • Which color indicates 35 and above and requires immediate element change?
  • A Class C type fire refers to which kind of fire?
  • Which tool helps contain spills during operations?
  • Besides fuels, what other petroleum products might a 92F handle?
  • EPA stands for which agency?
  • The methods of natural ventilation, forced ventilation, steam ventilation, and water displacement are used for what purpose?
  • What is an explosimeter?
  • How can you tell water is present in fuel?
  • What are common sources of fuel contamination and how can they be prevented?
  • NRT stands for which organization?
  • What best describes static electricity?
  • Contaminated material disposal should follow established procedures.
  • Why is bonding and grounding essential during fueling operations?
  • What is the primary purpose of a bonding wire between metallic containers?
  • Class A fires involve which materials?
  • What action is required when the status is 35 or above (Red)?
  • What oxygen concentration is considered dangerous?
  • What does friction loss describe in piping systems?
  • Which measure expresses pressure as the height of a fluid column?
  • Halon extinguishes a fire by which mechanism?
  • SPCC stands for what?
  • What is the correct method to blank off a tank?
  • Which barrier is a tubular floating device used for containment?
  • Which combination describes the 600 GPM FS in terms of elements and canisters?
  • Why is accurate stock accounting critical for a petroleum supply unit?
  • What is the lower explosive limit for petroleum vapors?
  • A tank has capacity 1000 gallons and is 75% full. What is its contribution to total fuel on hand?
  • Pour point testing helps determine which of the following?
  • Which of the following is NOT typically used to document fuel transactions?
  • In the M978 300-GPM FS, Model A uses how many canisters, and Model B uses how many coalescers and canisters?
  • How do you calculate total fuel on hand across multiple tanks?
  • Which statement correctly describes the 350-GPM Filter Separator?
  • Which action is required when the status is 20-35 (Yellow)?
  • How should empty fuel drums or containers be managed?
  • OSC stands for which term in spill response?
  • In the status scale, the range 20-35 corresponds to which color?
  • What is the flammable vapor mixture range considered explosive?
  • Class C fires involve which?
  • In an emergency, which action is the correct direction of aiming when using a fire extinguisher?
  • What is a common reason for cleaning storage tanks?
  • What is an ideal procedure for fueling at a point or hydrant in the field?
  • What is the standard meaning of a 'barrel' in fuel terminology?
  • What does grounding accomplish in static potential control?
  • What is bonding in static electricity control?
  • Which core training topics are essential for a 92F?
  • Which statement about the three-stage filter process describes the correct sequence of stages from first to last?
  • Bonding provides what in relation to static potential after operations begin?
  • During a fuel transfer, what should be monitored?
  • Which group coordinates federal response actions across agencies during a spill?
  • A soil sequence including silt gravel, gravel-sand-silt, silt sand, sand, silt, peat, muck and swamp has what depth?
  • What action should be taken when inventory discrepancies are detected?
  • The 100-GPM filter separator uses how many filter elements and canisters?
  • A spill is classified as MINOR in inland waters if it is less than how many gallons?
  • In inland waters, a spill of 500 gallons is considered what?
  • Which option is NOT a pump type discussed in the material?
  • A spill of 50,000 gallons in coastal waters falls into which class?
  • Which statement best explains the lower explosive limit for petroleum vapors?
  • A 5k tanker gauge reading of which range is GOOD?
  • An explosimeter measures the atmospheric conditions inside which location?
  • Which two filter roles are addressed by field fuel filters?
  • In a soil profile including clay, inorganic clay, claying gravel, and silt, what is the depth?
  • A spill of 20,000 gallons occurs in inland waters. What class is it?
  • Static electricity can be generated by which processes?
  • How can 92F personnel support environmental protection during operations?
  • In what range do gasoline vapors mix with air to form explosive mixtures?
  • What is the purpose of quality-control in 92F duties?
  • Which sequence correctly describes basic steps in cleaning up a fuel spill?
  • Which statement about fire extinguisher inspection is true?
  • Which item is NOT a focus of pre-operation inspections on fuel equipment?
  • What is the role of QA/QC in 92F operations?
  • What is the purpose of NATO fuel codes and labeling?
  • An explosimeter reading from 14% to 100% indicates what safety measure?
  • When performing pre-transfer checks, which of the following is essential to ensure safe transfer?
  • Which term describes the inner space that holds fuel inside the pump housing?
  • Two tanks: 600 gallons capacity at 50% full and 400 gallons capacity at 80% full. What is total fuel on hand?
  • Which description best reflects 'NO GO FUSE: RAPID' in the three-stage filter process?
  • What is the depth associated with cohesionless sands and gravel?
  • What is the proper method for using a dipstick or sight gauge to determine fuel quantity?
  • Priming in a pump system refers to which action?
  • How should flammable liquids be stored with respect to other materials?
  • How can you identify a potential contamination path in a storage area?
  • Which action would be inappropriate when documenting fuel transfers?
  • Which term is commonly abbreviated as NRT?
  • What is the purpose of inventory reconciliation after a field operation?
  • What are key pre-transfer steps before moving fuel from a tank to a vehicle?
  • What is considered a minor spill in inland waters?
  • How often should the fuel filter be changed?
  • Which two common types of filters are used in field fuel systems?
  • Gasoline vapors form an explosive mixture in air within which range?
  • What does AAFARS stand for?
  • When should an inline filter be replaced?
  • Which statement about storage tank designs is true?
  • What is the purpose of collecting a fuel sample in QA/QC?
  • What does the 5k tanker gauge range 0-15 indicate?
  • How should stabilizers or anti-oxidants be stored and used?
  • Which of the following describes a type of storage tank?
  • What does PASS stand for in fire extinguisher use?
  • Which filter separator is Marine Only?
  • In the M978 300-GPM FS, Model A uses 15 canisters and Model B uses 6 coalescers and 2 canisters.
  • Which of the following statements best describes the impact of fuel contaminants and water on engine performance?
  • Which practice most effectively prevents misidentification of fuel containers?
  • For a 50-GPM filter separator, how many filter elements and canisters are used?
  • Which set of instruments is representative of those used at a fuel storage site?
  • Dry Chemical extinguishers work on Class A, B, or C; their method is to:
  • What is the role of the third stage in the filter separator?
  • What does the second stage do in the filter separator?
  • How many classes of fire are there?
  • Identify the materials that should be isolated from flammable liquids during storage.
  • Which factor is affected by the API gravity of a fuel?
  • Water type fire extinguishers may be used on what class of fire?
  • Why is it not permissible to mix fuels or additives without approval?
  • Grounding is achieved by connecting units to a ground rod to discharge static potential into the earth. True or False?
  • Which sequence best describes containment of a small fuel spill in the field?
  • During fueling, when should the transfer be stopped?
  • Which action would be inappropriate when fueling at hydrant?
  • What does specific gravity tell you about a petroleum product?
  • Which barrier uses air pressure to push oil inland to contain a spill?
  • Which action helps prevent static discharge during fuel transfer?
  • Which action should be taken after completing a transfer to ensure proper records?
  • What is the function of a fuel filter/separator in a storage and distribution system?
  • How often do fire extinguishers need to be inspected?
  • Which of the following is identified as a fire hazard in storage areas?
  • Dry Chemical extinguishers are rated for which classes?
  • Which component pulls fuel forward?
  • What steps should you take if you suspect contaminated fuel?
  • Which GPM rating has 7 elements and 2 canisters?
  • Which set correctly lists the three elements of the fire triangle?
  • Which statement correctly defines the MAJOR class of oil spills?
  • Which statement about Class A fires is true?
  • A spill of 120,000 gallons occurs in coastal waters. What class is it?
  • Which term describes a barrier used to stop the spread of petroleum after removal, typically a chemical barrier?
  • Which term refers to a regional team of agencies for spill response?
  • Which item is NOT a purpose of pre-operation inspections on fuel equipment?
  • Which maintenance interval is correct for changing the fuel filter?
  • Which statement best describes the overall three-stage filter separator operation?
  • Why is the Safety Data Sheet (SDS) important in 92F work?
  • What method is used for vapor freeing?
  • Which description of spontaneous combustion is correct?
  • Why is grounding and bonding used during fuel transfers?
  • What PPE is typically required when handling fuels in 92F duties?
  • What is the term for the measure of pressure expressed as the height, in feet, of a column of fuel?
  • How does fuel quality influence engine and system performance?
  • How often must all separators undergo a Filter Effectiveness Test (FET)?
  • In addition to JP-8, what else does 92F handle?
  • What is the outer shell of a pump called?
  • What is the purpose of a water separator in a fuel system?
  • A Class C fire corresponds to which type of fire?
  • Which statement describes a grab sample vs a composite sample?
  • What is the primary role of a 92F Petroleum Supply Specialist in Army operations?
  • Which unit conversions are essential for 92F fuel operations?
  • Floating roof tanks are designed with roofs that...
  • An explosimeter reading of 4% or less indicates what entry condition?
  • How do you verify product identification at a storage site?
  • What is the function of the first stage in the filter separator?
  • What is the purpose of a water separator in a storage facility?
  • Class D fires involve which materials?
  • Which acronym refers to a plan used to coordinate response to a major spill?
  • Define pour point and its importance in cold-weather operations.
  • Which term describes the inner casing where fuel is held?
  • Which GPM rating uses 18 filters and 18 canisters?
  • Water Fire Extinguisher – Class A is effective because it:
  • Which pump is best suited to handle small quantities of liquids?
  • A spill of 50,000 gallons occurs in inland waters. What class is it?
  • Which disposal method is listed for sludge?
  • Which extinguisher is used for Class B or C by diluting air?
  • What is the inner casing where fuel is held called?
  • What is JP-8 and its role in Army fuel operations?
  • Which statement correctly describes the bonding wire between metallic containers?
  • Why are flash point and pour point tested on fuels?
  • An explosimeter reading from 4% to 14% indicates what entry condition?
  • Which of these is listed as a possible source of ignition?
  • Which barrier stops the spread of petroleum products after the product has been removed?
  • In inland waters, which spill volume would be considered minor?
  • Which class is Halon listed for in the material?
  • Which item is not typically handled by a 92F?
  • Which factor most directly affects the pumpability of fuel in cold weather?
  • Why should you verify product identity rather than relying on color coding alone?
  • How can water be detected in fuel?
  • Which statement describes a primary storage tank design feature?
  • How do carbon dioxide extinguishers control a fire?
  • Which term describes the person responsible for directing on-scene actions during a spill?
  • The PREFERRED TYPE corresponds to which range?
  • Class B fires involve which materials?
  • An explosimeter reading of 100% or above indicates what action?
  • A 5k tanker gauge reading of which range is BAD?
  • Carbon Dioxide Fire Extinguisher is suitable for Class B or C fires because it:
  • Why is API gravity important when handling petroleum products?
  • Which description best defines a rotary pump?
  • Which statement is true about the 0-20 status range?
  • What is a correct description of static electricity control methods?
  • FRP stands for which phrase?
  • One reason for cleaning storage tanks is to address which issue?
  • Which statement best defines spontaneous combustion?
  • Which pump is the most common in the military inventory?
  • What is the purpose of using absorbent material during a spill?
  • A spill of 8,500 gallons occurs in coastal waters. It is classified as which class?
  • In the filter element status scale, which color corresponds to the 0-20 range and indicates the elements are clean?
  • Which component requires a FET every 30 days?
  • Which three elements are required to start and sustain a fire?
  • What records are typically used to document fuel transactions?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy